MUX2E1-T is 2xE1 to Ethernet Converter. The vaild brandwidth of each E1 is 1984Kbps,the highest rate is 3968Kbps. E1 port can support BNC/75ohm and RJ45/120ohm optional.

MUX2E1-T is a kind of high-performance, remote,self-learning Ethernet Bridge.Its compact size and low cost make it deal for cost-sensitive bridging applications or as a LAN extender over bit stream type infrastructures.The main E1 link may be clocked from the recovered received clock.The vaild brandwidth of each E1 is 1984Kbps,the highest rate is 3968Kbps.This converter allows transmitting and receiving VLAN data packets.

*Comply  with  ITU G.703,G.704,G.706,G.823
*Support transparent E1 channel
*Full comply  with IEEE 802.3/IEEE802.3u and IEEE 802.1Q(VLAN)
*Ethernet port 10/100Mbps,Full/Half Duplex mode compatible
*For E1 interface,75ohm(unbalanced) and 120ohm(balanced) optional
*Allowing 32ms for  transmission time delay of 2E1
*Every E1 take 64Kbps channel depletion,the valid bandwidth of every E1 is 1984Kbps
*Auto-detect the valid E1 channels and auto-balanced the data flow among  the valid E1 channels
*Comprehensive LED indicators on front panel,convenient for the diagnosis of equipment working state
*-48V DC & 220V AC power supply optional

E1 interface
Comply with ITU G.703,G.704,G.706,G.823
Rate:2.048Mbps
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical connector:BNC coaxial for unbalanced 
                                    RJ45 twisted pair for balanced

Ethernet interface
Comply with IEEE802.3/IEEE 802.3u and IEEE 802.1Q(VLAN)
Rate:10/100Mbps,Half/Full auto-negotiation
MDI/MDI-X auto-crossover
Physical connector:10/100  Base-T(UTP);RJ45
Power supply
AC power:220V±10%,50Hz
DC power:-48V(optional)
Power:5W

Environment
Temperature:0～40℃
Humidity:0～95% RH