GVE-T is E1 to Ethernet Converter. E1 port can support BNC/75ohm and RJ45/120ohm optional.

GVE-T is E1 to Ethernet converter,it is a high performance,remote,self-learning Ethernet Bridge.Its compact size and low cost make it ideal for cost-sensitive bridging applications or as a LAN extender over bit stream type infrastructures.The main E1 link may be clocked from the recovered receive clock or from an internal oscillator.This converter allows transmitting and receiving VLAN data packets.Standalone and Rack mount module are both available.

*Comply with  ITU G.703,G.704,G.706,G.823
*Full comply with IEEE 802.3/IEEE 802.1Q(VLAN)
*Framed(N*64Kbps) and unframed(2.048Mbps) optional
*Ethernet port 10Mbps,Full/Half Duplex mode compatible
*Frame mode support PCM30/PCM31
*Support CRC4
*Support internal clock,E1 recovery clock
*Provide analog  and digital  loopback and remote digital loopback test
*For E1 interface,75ohm(unbalanced) and 120ohm(balanced) optional
*Comprehensive LED indicators on front panel,convenient for the diagnosis of equipment working state
*Stand-Alone and Rack-Mount type optional
*16-slots,elaborate cooling design and two redundant power supply
*Support starting timeslot setting
*-48V DC & 220V AC power supply optional

E1 & FE1  interface
Comply with ITU G.703,G.704,G.706,G.823
Rate:2.048Mbps;N*64Kbps(N=1~31)
Code type:HDB3
Impedance:75ohm unbalanced & 120ohm balanced optional
Physical interface:BNC coaxical  for unbalanced
                                 RJ45 twisted pair for balanced

Ethernet interface
Comply with IEEE 802.3/IEEE 802.3Q(VLAN)
Rate:10Mbps,Half/Full auto-negotiation
MDI/MDI-X optional
Physical interface:10 Base-T(UTP);RJ45

Power supply
AC power:220V±10%,50Hz
DC power:-48V(optional)
Power:5W

Environment
Temperature:0～40℃
Humidity:0～95% RH